1. Apply a small amount of oil to the O-ring of the air compressor. 2. Slide the air compressor into the flywheel housing. 3. Install…
Author: Jack
Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.
Flushing high-pressure fuel pump 1. Loosen the knob of the fuel lift pump (1) by turning it counterclockwise. 2. Operate the manual fuel lift pump…
1. Clean the sealing surfaces and fit a new gasket. Always use a new gasket. 2. Install the fuel intake module (8) and tighten the…
1. Remove the packaging from the pump units. – If the pump units are reused, the O-rings must be replaced. – Install the O-rings in…
Always install new pump unit lifters if the camshaft is replaced. Never use pump unit lifters that have been dropped, are corroded, or are in…
1. Clean the gasket face of both the engine block and oil filling pipe (4). 2. Place the gasket onto the oil filling pipe (4)…