Table of Contents Remove Install Remove TOC  WARNING  Do not remove the pressure cap from a hot engine. Wait until the coolant temperature is below…

Table of Contents Initial Check Initial Check TOC Check for a blown fuse. Check the wiring from the gauge to the sending unit for a…

Table of Contents Adjust Remove Inspect for Reuse Install Adjust TOC Consult the vehicle manufacture for non-Cummins fan hub installations. Do not adjust belt tension…

Cooling System Tool Number CC-2602 Cooling System Test Kit The Fleetguard® coolant test kit is used to check the concentration of coolant additives in the…

Table of Contents Fluorescent Dye Tracer Fuel Pressure Test Fluorescent Dye Tracer TOC NOTE: This test is not effective on a cold engine, less than 21°C…

Table of Contents Remove Inspect for Reuse Install Remove TOC Drain the lubricating oil. Refer to Procedure 007-025. Remove the oil pan. Refer to Procedure…

Table of Contents Remove Clean Inspect for Reuse Install Remove TOC Drain the lubricating oil. Refer to Procedure 007-025. Remove the oil pan mounting capscrews.…

Table of Contents Remove Inspect for Reuse Install Remove TOC Remove the lubricating oil filter head. Refer to Procedure 007-015. SMALL | MEDIUM | LARGE Next Inspect for Reuse…

Table of Contents Test Test TOC Check the following for defects. Electrical wiring broken Sending unit malfunction. SMALL | MEDIUM | LARGE Next NOTE: The M11 CELECT™ and CELECT™ Plus…

Table of Contents Drain Fill Prime Drain TOC Fill TOC Clean and check the oil drain plug threads and the seal surface. Install the oil…