Table of Contents Remove Inspect for Reuse Install Remove TOC Remove the fuel hose. SMALL | MEDIUM | LARGE Next Inspect for Reuse TOC Inspect the inside of the…

Table of Contents Measure Measure TOC Remove the fuel supply hose to the gear pump and install the manometer, Part Number ST-1111-3. Use the appropriate…

Table of Contents Remove Install Remove TOC  WARNING  Fuel is flammable. Keep all cigarettes, flames, pilot lights, arcing equipment, and switches out of the work…

Table of Contents Measure Measure TOC Inspect the drain lines and make sure the lines do not have any loops and are not crimped. SMALL | MEDIUM | LARGE…

Table of Contents Remove Install Remove TOC Disconnect all three wiring harnesses from the ECM. Use the following procedure in the CELECT™ Electronic Control System…

Table of Contents Test   Sight Glass Method STC CELECT™ or CELECT™ Plus Test TOC Sight Glass Method Remove the fuel suction line. Install a…

Table of Contents Injectors and Fuel Lines Injectors and Fuel Lines TOC Tool Number ST-1111-3 Mercury Filled Manometer Used to measure fuel drain line restriction.…

Table of Contents Initial Check Initial Check TOC To check for a sticking pressure regulator, install a pressure gauge on the Compuchek™ fitting in the…

Table of Contents Remove Install Remove TOC Remove the linkage from the VS throttle lever. SMALL | MEDIUM | LARGE Next Remove the following components: VS housing cover Gasket…

Table of Contents Remove Install Remove TOC Remove the locknuts and jam nuts. Discard the copper washers. SMALL | MEDIUM | LARGE Next Install TOC Install new copper washers…