Table of Contents Install Install TOC NOTE: The rocker lever cover gaskets are reusable. Do not replace the gaskets unless they are damaged. Install the rocker…

Table of Contents Install Adjust Install TOC Install new engine brake housing gaskets and the engine brake housings. SMALL | MEDIUM | LARGE Next Install the engine brake housing…

Table of Contents Install Install TOC Install the adjusting screw and the lock nut in each rocker lever. Do not tighten the lock nuts. SMALL | MEDIUM | LARGE…

Table of Contents Install Install TOC Install the valve crossheads in their original location and orientation. Lubricate the valve stems with clean 15W-40 oil. SMALL | MEDIUM | LARGE…

Table of Contents Install Install TOC Use clean 15W-40 oil to lubricate the ball end of the push rods. NOTE: The injector push rods (1) are…

Table of Contents Install   CELECT™ STC Install TOC CELECT™ When installing injectors for reuse, new o-rings must be installed on the injector. NOTE: The CELECT™…

Table of Contents Install Install TOC Install two o-rings (1) on each of the two water tubes (2). Install one o-ring (1) on each of…

Table of Contents Install Install TOC Install new gaskets on the dowel pins in the cylinder block. Make sure the side of the gasket marked…

Table of Contents Install Install TOC Install the new cam follower gaskets to the block as follows: Obtain gaskets with the same thickness as the…

Table of Contents Install Install TOC Install the support bearing into the bore of the gear cover. Do not install the o-ring onto the support…