Table of Contents Install Install TOC Apply a 12.7 mm [0.05 in] bead of RTV sealant to the rear cover, block, front cover, and block…

Table of Contents Install Install TOC Install one 7/16 – 20 x 4-inch guide stud into each side of the gear cover mounting flange to…

Table of Contents Install Install TOC NOTE: “LDL TFE” (Lay-Down Lip, Teflon™) oil seals for service replacement have an assembly tool which protects the seal lip…

Table of Contents Install Install TOC A guide must be used to prevent damage by reversing the main sealing lip because of incorrect contact with…

Table of Contents Install Install TOC NOTE: The oil grooves on the thrust washer must be toward the camshaft gear to prevent thrust washer malfunction. Apply…

Table of Contents Install Install TOC Install the upper bearing shell in the connecting rod. If used bearing shells are to be installed, each bearing…

Table of Contents Install Install TOC NOTE: Make sure the cylinder block and all parts are clean before assembly. If used liners are being installed again,…

Table of Contents Install Install TOC Use a lint free cloth to clean the crankshaft bearing journals. SMALL | MEDIUM | LARGE Next  WARNING  This component or assembly weighs…

Table of Contents Remove Remove TOC  CAUTION  The main bearing caps must be marked for position and cylinder block identification. The position number (1) of…

Table of Contents Remove Remove TOC  CAUTION  The liner puller must be installed and used as described to avoid damage to the cylinder block. The…