Tools Required • J 41515 – A Glow Plug Socket • J 39083 Glow Plug Connector Tool 1. Install the crankshaft position sensor in the…

1. Install the turbocharger on the exhaust manifold and the studs. Notice : Refer to Fastener Notice in Cautions and Notices. 2. Install the nuts…

1. Install the new gasket to the oil pump drive. 2. Install the oil pump drive to the engine. • Index the drive with the…

Notice: Refer to Fastener Notice in Cautions And Notices. 1. Install the left exhaust manifold and the bolts. Tighten Tighten the bolts to 35 N-m…

1. Clean the sealing surfaces on the water pump plate and the block. 2. Install the water pump and the gasket to the water pump…

Tools Required J 29873 Nozzle Socket Important: Never rotate the engine with the starter, the starter location engine rotation fixture, or with the wrench from…

Important: Before installing the crankshaft balancer, check the oil seal contact area for grooving and roughness. Replace the crankshaft balancer if necessary. 1. Tap the…

Tools Required J 22102 Seal Installer Important: Replacing either of the following will affect timing: • The timing chain • The timing gears • The…

1. Install the keyway in the crankshaft. Important: • Do not damage the reluctor wheel square bosses. • Align the timing marks. Install the crankshaft…

1. Clean the sealing surfaces on the cylinder head and the valve rocker arm cover, so that the surfaces are free from oil and foreign…