After overhaul, the engine must be tested before it is installed in the vehicle. If a suitable test stand is not available, the following procedure…

1. Install the left accessory/lift bracket. Notice : Refer to Fastener Notice in Cautions and Notices. 2. Install the left accessory/lift bracket retaining bolts. Tighten…

1. Install the inner retainer (if equipped). 2. Install the fly wheel. 3. Install the outer retainer (if equipped). Notice : Refer to Fastener Notice…

Caution : Wear safety glasses in order to avoid eye damage. 1. Install the NEW clutch pilot bearing. 2. Measure to ensure the proper installation…

1. Install the oil fill tube grommet to the front cover. 2. Install the oil fill tube to the front cover. Notice : Refer to…

1. Install a new O-ring seal to the oil level indicator tube. Install the oil level indicator tube to the engine. Notice : Refer to…

1. Install the thermostat bypass connector. 2. Install the thermostat bypass hose and clamps. 3. Install the thermostat housing and gaskets. Notice : Refer to…

1. Apply the silicone sealant GMP/N 9985943, or equivalent to the turbo charger outlet. 2. Install the intake manifold gasket. 3. Slide the intake in…

1 . Apply the silicone sealant GMP/N 9985943, or equivalent to the turbo charger outlet. 2 . Install the EGR tower gasket on the round…

1. Install the intake manifold and gaskets. Notice: Refer to Fastener Notice in Cautions and Notices. 2. Install the intake manifold bolts/studs and fuel line…