Table of Contents Install Install TOC Use clean 15W-40 engine oil to coat the ball end of the push tubes and push rods. NOTE: The injector…

Table of Contents Install Install TOC The rocker lever assemblies must be installed in the engine so they are in the same position as they…

Table of Contents Install Install TOC  CAUTION  To reduce the possibility of injector sleeve damage, do not use anything metal to scrape the copper injector…

Table of Contents Install Install TOC Use a new gasket, and install the rocker lever housing. SMALL | MEDIUM | LARGE Next Step 1: Snug all bolts. Step 2:…

Table of Contents Install   Slip Fit Interference Fit Install TOC Slip Fit NOTE: Accessory drive seal dust seals are only to be installed on single…

Table of Contents Install Install TOC Do not use lubricant to install the seal. The oil seal must be installed with the lip of the…

Table of Contents Install Eccentricity Check Wobble Check Install TOC Install the vibration damper, crankshaft pulley, and clamping plate. Refer to Procedure 001-022 in Section…

Table of Contents Install   Unitized Seal Install TOC Unitized Seal The capscrew hole spacing on the front crankshaft oil seal is not symmetrical. Start…

Table of Contents Install Install TOC Install the belt tensioner. Install and tighten capscrews. Torque Value:  47  n.m  [35 ft-lb] SMALL | MEDIUM | LARGE Last Modified:  05-Mar-2009 Feedback / Help

Table of Contents Install Install TOC Apply a coating of thread sealant, Part Number 3823494, to the three capscrews at locations 1, 2 and 3.…