Table of Contents Install Install TOC Install the fan hub support with three mounting capscrews. Torque Value:  75  n.m  [55 ft-lb] SMALL | MEDIUM | LARGE Last Modified:  12-Oct-2005 Feedback / Help

Table of Contents Install Install TOC Remove capscrew (1) from the gear cover. Use the capscrew to install the coolant outlet clamp and tube to…

Table of Contents Install Install TOC Install the fuel filter head bracket and the mounting capscrews. Tighten the mounting capscrews. Torque Value:  47  n.m  [35 ft-lb] SMALL | MEDIUM | LARGE Last Modified:  22-Sep-2005…

Table of Contents Install Install TOC Install a new cooling plate. Install the heat-resistant grommets on both sides of the cooling plate. Install the two…

Table of Contents Install Install TOC Install the jaw coupling spider, mounting gasket, and fuel pump. Install the four mounting capscrews. SMALL | MEDIUM | LARGE Next Install the…

Table of Contents Install Install TOC Install the existing hose and clamps at the end of the rear end of the air compressor inlet tube…

Table of Contents Install Install TOC Position the timing mark on the air compressor crankshaft at the 12:00 o’clock position. Position the accessory drive shaft…

Table of Contents Install   With EGR Without EGR Install TOC With EGR Install the breather tube, bracket, and capscrew on the engine. Tighten the…

Table of Contents Install Install TOC If the gasket was not damaged, it can be used again. If the gasket was damaged, it must be…

Table of Contents Install Adjust Install TOC Loosen the locknuts on the secondary pistons. Make sure the secondary pistons are fully retracted. Install the rear…