Table of Contents Install Install TOC Do not use lubricant to install the seal. The oil seal must be installed with the lip of the…

Table of Contents Install   With EGR Without EGR Install TOC With EGR If the needle bearing was removed, use bearing installation tool, Part Number…

Table of Contents Install   With EGR Without EGR Install TOC With EGR  CAUTION  Do not use petroleum products on the coolant plumbing o-rings. The…

Table of Contents Install Install TOC Install a new o-ring on the valve. Lubricate the o-ring with a film of antiseize compound. Install the valve…

Table of Contents Install Install TOC Use a new gasket to install the heater housing. Install the four mounting capscrews and tighten. Torque Value:  54  n.m  [40 ft-lb] Connect…

Table of Contents Install   With EGR Without EGR Install TOC With EGR Install two guide pins, Part Number 3376488, in the top row of…

Table of Contents Install Install TOC Install the front bracket and capscrews. Torque Value:  47  n.m  [35 ft-lb] Install the rear bracket and capscrews. Torque Value:  81  n.m  [60 ft-lb] SMALL | MEDIUM | LARGE Last Modified:  23-Jan-2009…

Table of Contents Install Install TOC Install the fan hub, clutch, and capscrews. Tighten the capscrews alternately and evenly. Torque Value:  47  n.m  [35 ft-lb] SMALL | MEDIUM | LARGE Last Modified:  23-Jan-2009 Feedback…

Table of Contents Install Install TOC Install the fan hub and four capscrews. Torque Value:  47  n.m  [35 ft-lb] SMALL | MEDIUM | LARGE Last Modified:  12-Feb-2009 Feedback / Help

Table of Contents Install Install TOC NOTE: Do not tighten the locknut until the fan drive belt has been installed and adjusted. Install the idler pulley…