Table of Contents Preparatory Steps Remove Clean Inspect for Reuse Install Fill Preparatory Steps TOC Drain the lubricating oil. Refer to Procedure 007-025-005. Remove the…

Table of Contents Preparatory Steps Remove Inspect for Reuse Measure Install Preparatory Steps TOC Remove the drive belt. Refer to Procedure 008-002. NOTE: Removal is easier…

Table of Contents Remove Clean Inspect for Reuse Install Remove TOC 19 mm Remove the threaded plug, spring, and plunger. Service Tip: The plunger normally…

Table of Contents General Information Drain Remove Clean Inspect for Reuse Install Fill General Information TOC Cummins Inc. recommends the use of a high-quality SAE…

Table of Contents Remove Install Remove TOC Oil Filter Wrench, Part Number 3397929 Clean the area around the lubricating oil filter head. Use the oil…

Table of Contents Calibrate Calibrate TOC NOTE: This procedure must begin with the oil pan drained. Refer to Procedure 007-025. Install the dipstick in the dipstick…

Table of Contents Preparatory Steps Remove Clean Leak Test Install Preparatory Steps TOC  WARNING  Coolant is toxic. Keep away from children and pets. If not…

Table of Contents Preparatory Steps Remove Install Preparatory Steps TOC  WARNING  Some state and federal agencies have determined that used engine oil can be carcinogenic…

Lubricating Oil System Tool Number 3397929 Oil Filter Wrench Used to install and/or remove the large spin-on lubricating oil or fuel filters. Tool Number 3376579…

Table of Contents General Information Remove Install General Information TOC Filtration and separation of oil from the fuel is important for trouble-free operation and long…