Cam Followers/Tappets Tool Number 3822513 Tappet Removal Tool Kit Used to remove and install valve tappets. Last Modified:  03-Apr-2002 Feedback / Help

Table of Contents General Information Remove Disassemble Assemble Install General Information TOC SMALL | MEDIUM | LARGE Closed-Crankcase Ventilation System Blowby gas is evacuated from the crankcase via this…

View Related Topic Table of Contents Remove Clean and Inspect for Reuse Install Remove TOC Remove the crankcase breather tube from the crankcase breather. SMALL | MEDIUM | LARGE…

Table of Contents Remove Clean Inspect for Reuse Install Remove TOC 15 mm Remove the rocker lever covers. SMALL | MEDIUM | LARGE Next Clean TOC  WARNING  Wear appropriate…

Table of Contents Remove Disassemble Clean Inspect for Reuse Assemble Install Remove TOC 15 mm Remove the rocker lever covers. SMALL | MEDIUM | LARGE Next 14 mm Loosen…

Table of Contents General Information Adjust General Information TOC Diagnosing component malfunctions – rocker lever, valve stem, push tube, tappet, and camshaft. The rocker lever…

Table of Contents Preparatory Steps Remove Clean and Inspect for Reuse Install Finishing Steps Preparatory Steps TOC Remove the Air Compressor (if applicable). Refer to…

Rocker Levers Tool Number 3823921 Capscrew Length Gauge Used to measure capscrew free length. Tool Number 3824591 Engine Barring Tool Used to engage the flywheel…

Table of Contents Initial Check Remove Install Initial Check TOC Head Gasket Sealing If the compression was found low on adjacent cylinders and the pressure…

Table of Contents General Information Preparatory Steps Disassemble Clean Inspect for Reuse   Valve Guide Valve Seat Valve Valve Springs Assemble Install General Information TOC…