Table of Contents Install Install TOC The present o-ring has been produced by two distinctly different manufacturing processes. Following are those two methods and the…

Table of Contents Remove Remove TOC The cylinder liners can be removed by using the cylinder liner remover, Part Number 3163745, and cylinder liner remover…

Table of Contents Remove Remove TOC Replace the main bearings one at a time. Remove the main bearing capscrews. Use main bearing cap puller, Part…

Table of Contents Remove Remove TOC The Number 4 main bearing cap has thrust bearings. The cap is located with two dowel pins.   SMALL | MEDIUM | LARGE…

Table of Contents Remove Remove TOC  WARNING  Use caution while removing the retainer plug (1). The pressure relief valve spring (2) is under compression. Personal…

Table of Contents Remove Remove TOC  WARNING  Carefully remove the retainer plug. The pressure regulator spring is under compression. Personal injury can result. Wear face…

Table of Contents Remove Remove TOC Remove capscrews 1 and 2 and install two guide pins, Part Number 3376697. SMALL | MEDIUM | LARGE Next  WARNING  This component or…

View Related Topic Table of Contents Remove   Non-REPTO Dry Lip Seal Non-REPTO Dry Unitized Seal REPTO Dry Seal Remove TOC Non-REPTO Dry Lip Seal…

Table of Contents Remove Remove TOC Hold the flywheel to prevent rotation. Install M10 – 1.50 x 40 puller capscrews (at points 1 and 2).…

Table of Contents Remove Remove TOC Use the accessory drive pulley to rotate the crankshaft so the connecting rod to be removed is at bottom…