Table of Contents Install Measure   Bore Alignment Face Alignment Install TOC Install two guide pins, Part Number 3376697, in the cylinder block to help…

Table of Contents Install Install TOC  WARNING  The regulator spring must be compressed to install the retainer plug. Personal injury can result. Wear face and…

Table of Contents Install Install TOC  WARNING  Use caution while installing the retainer plug (1). The pressure relief valve spring (2) is under compression. Personal…

Table of Contents Install Install TOC Use Lubriplate™ 105, Part Number 3163086, Part Number 3163087 or equivalent, to coat the upper thrust bearings. SMALL | MEDIUM | LARGE Next…

Table of Contents Install Install TOC  CAUTION  To reduce the possibility of engine damage, the upper and lower bearings must be installed in the correct…

Table of Contents Install Install TOC The present o-ring has been produced by two distinctly different manufacturing processes. Following are those two methods and the…

Table of Contents Remove Remove TOC The cylinder liners can be removed by using the cylinder liner remover, Part Number 3163745, and cylinder liner remover…

Table of Contents Remove Remove TOC Replace the main bearings one at a time. Remove the main bearing capscrews. Use main bearing cap puller, Part…

Table of Contents Remove Remove TOC The Number 4 main bearing cap has thrust bearings. The cap is located with two dowel pins.   SMALL | MEDIUM | LARGE…

Table of Contents Remove Remove TOC  WARNING  Use caution while removing the retainer plug (1). The pressure relief valve spring (2) is under compression. Personal…