Table of Contents Install Install TOC Install the existing hose and clamps at the end of the rear end of the air compressor inlet tube…

Table of Contents Install Install TOC Position the timing mark on the air compressor crankshaft at the 12:00 o’clock position. Position the accessory drive shaft…

Table of Contents Install   With EGR Without EGR Install TOC With EGR Install the breather tube, bracket, and capscrew on the engine. Tighten the…

Table of Contents Install Install TOC If the gasket was not damaged, it can be used again. If the gasket was damaged, it must be…

Table of Contents Install Adjust Install TOC Loosen the locknuts on the secondary pistons. Make sure the secondary pistons are fully retracted. Install the rear…

Table of Contents Install Install TOC Use clean 15W-40 engine oil to coat the ball end of the push tubes and push rods. NOTE: The injector…

Table of Contents Install Install TOC The rocker lever assemblies must be installed in the engine so they are in the same position as they…

Table of Contents Install Install TOC  CAUTION  To reduce the possibility of injector sleeve damage, do not use anything metal to scrape the copper injector…

Table of Contents Install Install TOC Use a new gasket, and install the rocker lever housing. SMALL | MEDIUM | LARGE Next Step 1: Snug all bolts. Step 2:…

Table of Contents Install   Slip Fit Interference Fit Install TOC Slip Fit NOTE: Accessory drive seal dust seals are only to be installed on single…