Table of Contents Remove Clean Inspect for Reuse Install Remove TOC Remove the alternator and alternator bracket. Refer to Procedure 013-001. SMALL | MEDIUM | LARGE Next Remove the…

Table of Contents Remove Clean Inspect for Reuse Install Remove TOC Remove the fan drive belt. Refer to Procedure 008-002. Remove the alternator drive belt.…

Table of Contents Remove Clean and Inspect for Reuse   Center Sump Pan Install Remove TOC NOTE: Cummins® Engine Company, Inc. does not recommend removing the…

Table of Contents Leak Test Leak Test TOC Drain the engine lubricating oil. Refer to Procedure 007-037 in Section 7. Remove the lubricating oil pan.…

View Related Topic Table of Contents Basic Description Inspect for Reuse Basic Description TOC Fretting, typically occurs on main bearing caps number 2 and number…

View Related Topic Table of Contents Preparatory Steps Remove   Non-REPTO Dry Lip Seal Non-REPTO Dry Unitized Seal REPTO Dry Seal Clean and Inspect for…

View Related Topic Table of Contents Preparatory Steps Remove   Lip Seal Unitized Seal Clean and Inspect for Reuse Install   Unitized Seal Finishing Steps…

Table of Contents Remove Inspect for Reuse Install Remove TOC Remove the fan drive belt. Refer to Procedure 008-002. SMALL | MEDIUM | LARGE Next Remove two of the…

Table of Contents Remove Clean Inspect for Reuse Install Remove TOC Remove the gear housing. Refer to Procedure 001-033. SMALL | MEDIUM | LARGE Next Install crankshaft gear puller,…

Table of Contents Rotation Check Rotation Check TOC Use only the accessory driveshaft to rotate the crankshaft. Rotate the crankshaft clockwise through two complete revolutions.…