Table of Contents Remove Clean Inspect for Reuse Install Remove TOC The piston and connecting rod must be removed as an assembly on M Series…

Table of Contents Remove Install Remove TOC Remove the camshaft. R Refer to Procedure 001-008. .  CAUTION  Support the camshaft gear on the center hub…

Table of Contents Remove Inspect for Reuse Install Remove TOC Remove the gear cover. Refer to Procedure 001-031. SMALL | MEDIUM | LARGE Next Remove the camshaft idler gear.…

Table of Contents Remove Clean Inspect for Reuse Install Remove TOC Remove the gear cover. Refer to Procedure 001-031. Remove the cylinder head. Refer to…

Table of Contents Remove Clean Inspect for Reuse Install Remove TOC Remove the air piping from the intake manifold. Remove the rocker lever cover. Refer…

Table of Contents Remove Install Remove TOC Cummins® Engine Company, Inc., recommends replacing the thrust bearings when the main bearings are replaced. Drain the lubricating…

View Related Topic Table of Contents General Information Preparatory Steps Remove Clean and Inspect for Reuse Install Finishing Steps General Information TOC Undersized main bearings…

Table of Contents Remove Clean and Inspect for Reuse Install Remove TOC Drain the lubricating oil. Refer to Procedure 007-037. Remove the lubricating oil pan.…

Table of Contents Remove Clean Install Remove TOC If equipped with an automatic belt tensioner, remove the alternator drive belt. Refer to Procedure 013-021. SMALL | MEDIUM | LARGE…

Table of Contents Remove Clean Install Remove TOC Remove the alternator drive belt. Refer to Procedure 013-005. Remove the alternator drive pulley. Refer to Procedure…