Centinel System – Master Repair Manual – Inadequate Use of Engine Lubricating Oil From Pan With Burn-Only System

Fuel consumption and/or oil consumption data are inaccurate

Verify fuel consumption and/or oil consumption data. Refer to Procedure 018-003 for engine specific oil blend rates.

Electronic fault codes active or high counts of inactive fault codes

Read the fault codes with an electronic service tool. Refer to Section TF.

Electronic control module (ECM) calibration is malfunctioning

Verify the ECM calibration is correct. Check the calibration revision history for applicable fixes to the calibration stored in the ECM. Refer to the calibration history spreadsheet Click here to see ecm_calibration_rev_history.xls

on QuickServe® Online or the INCAL™ CD-ROM. Compare the calibration stored in the ECM with the engine rating and the Control Parts List (CPL), Bulletin 4021326 or 4021327. If necessary, recalibrate the ECM. Refer to Procedure 019-032.

Lubricating oil level is above specification

Check the oil level. Verify the dipstick calibration and oil pan capacity. Fill the system to the specified level. Refer to the Troubleshooting and Repair Manual, N14 Series Engines, Bulletin 3666142, or Troubleshooting and Repair Manual, ISM, ISM^e and QSM11 Engines, Bulletin 3666322, or Troubleshooting and Repair Manual, M11 Series Engines, Bulletin 3666139, or Troubleshooting and Repair Manual, QSK Series Engines, Bulletin 3666098, or Troubleshooting and Repair Manual, QST30 Engines, Bulletin 3666217, or Troubleshooting and Repair Manual, QSK45 and QSK60 Engines, Bulletin 3666261, or Troubleshooting and Repair Manual, K19 Engines, Bulletin 3810307, or Troubleshooting and Repair Manual, K38 and K50 Engines, Bulletin 3810432, or Troubleshooting and Repair Manual, Pre-1994 L10 Models, Bulletin 3810246, or Troubleshooting and Repair Manual, L10 External Damper Model Engines, Bulletin 3810439.

Oil and fuel consumption parameters are not correct (not applicable to integrated system)

Verify that the calibration plug is correct. Verify that the Centinel™ control module calibration values are correct. Refer to Procedure 019-131 and Procedure 209-001.

Lubricating oil control valve malfunctioning

Inspect the oil control valve for proper operation. Refer to Procedure 007-078.

Internal engine damage

Analyze the oil and inspect the filters to locate an area of probable damage. Refer to the Troubleshooting and Repair Manual, N14 Series Engines, Bulletin 3666142, or Troubleshooting and Repair Manual, ISM, ISM^e and QSM11 Engines, Bulletin 3666322, or Troubleshooting and Repair Manual, M11 Series Engines, Bulletin 3666139, or Troubleshooting and Repair Manual, QSK Series Engines, Bulletin 3666098, or Troubleshooting and Repair Manual, QST30 Engines, Bulletin 3666217, or Troubleshooting and Repair Manual, QSK45 and QSK60 Engines, Bulletin 3666261, or Troubleshooting and Repair Manual, K19 Engines, Bulletin 3810307, or Troubleshooting and Repair Manual, K38 and K50 Engines, Bulletin 3810432, or Troubleshooting and Repair Manual, Pre-1994 L10 Models, Bulletin 3810246, or Troubleshooting and Repair Manual, L10 External Damper Model Engines, Bulletin 3810439.