1. Camshaft bearings 2 to 6 are removed in almost the same way as camshaft bearing 7. The difference is that the small guide/press ring…
Category: Paccar
1. Use a suitable support and rotate the engine. Rotate the engine to gain access to the camshaft cavity. 2. Fit the adapter (A) to…
1. The camshaft bearings are removed using the special tool, including: Adapter (A) Spindle (B) Guide adapter (C) Guide/press ring (D), small Shim rings (E)…
Special tools Special tool category: Recommended special tool 1453160 Disassembly and assembly tool for the camshaft
1. Use the special tool (1453160) to remove the camshaft. 2. Insert the handle (1), from the flywheel side of the engine, through the hollow…
1. Clean the area around the crankshaft seal ring thoroughly. 2. Install the spindle (A) of the special tool (1453185) to the crankshaft flange using…
1. Rotate the crankshaft until the timing marks align as shown. – The position of the mark on the idler gear (7) is irrelevant. –…
1. Clean the area around the crankshaft seal ring thoroughly. 2. Fit the spindle (A) of the special tool (1453185) onto the crankshaft flange. 3.…
1. Remove all the flywheel attachment bolts. 2. Use two M10 bolts to push the flywheel off the crankshaft. Ask a second person to help…